Writing Sewing Machine Data To An Sd Card - Brother KE-430F Service Manual

7. USING SD CARDS

7-11. Writing sewing machine data to an SD card

1
2
3
Ending read/write mode
4
52
While writing
"MEM" appears in the tension
display while memory switch
settings are being written, the
pattern number appears while
additional pattern data is being
written, and "PrG" appears while
program data is being written
TEST indicator switches off
Select the " w8" SD data read/write mode.
(Refer to "7-3. Preparation for reading and writing data".)
2671B
Press the ENTER key.
・ The buzzer will sound and the sewing program data,
cycle program data, memory switch settings and
additional pattern data will be read from the SD card
and stored in the sewing machine's memory.
2672B 2663B
When the display returns to the status in step 1, writing of
the sewing machine data is complete.
・ If you would like to use any other read/write modes,
press the
run it.
2671B
Press the TEST key.
2404B
KE-430F, BE-438F
or key to select the mode and then
2414B