Brother KE-430F Service Manual page 15

・ After a program has been finished, you can revise the program by changing the setting details.
・ You can organize the use of program numbers so that, for instance, programs with the same pattern but different sizes or
upper thread tensions to suit the material being sewn are preset. (Refer to "5-2. Program setting method" in the CD
instruction manual.)
Example:
Pattern: No. 50
2592B
The following table shows restrictions for sewing program numbers, pattern numbers and parameters.
Model
Sewing program No.
Pattern No.
X-scale (%)
Y-scale (%)
Sewing speed (sti/min)
Slow start pattern
X parallel movement amount (mm)
When memory switch No. 465 is set to 3
Y parallel movement amount (mm)
When memory switch No. 465 is set to 3
Work clamp/button clamp height (high) (mm)
When memory switch No. 470 is set to ON.
Work clamp/button clamp height (medium) (mm)
When memory switch No. 470 is set to ON.
Upper thread tension setting value
3. RELATIONSHIP BETWEEN PROGRAMS AND PATTERNS
Standard programs
Preset Not preset
430F 438F 430F
1 - 89 1 - 64 90 - 199
1 - 89 1 - 64
Fixed at same number as sewing
program
430F: 200 - 3200 / 438F: 200 - 2700
430F: 10 - 17 / 438F: 6 - 13
430F: 1 - 17 / 438F: 1 - 13
KE-430F, BE-438F
Program No. 200
・Pattern: No. 50
・X- and Y-scale: 150%
・Sewing speed: 2700 sti/min
・Upper thread tension: 100
...
Program No. 201
・Pattern: No. 50
・X- and Y-scale: 100%
・Sewing speed: 1000 sti/min
・Upper thread tension: 30 ...
Program No. 202
・Pattern: No. 50
・X- and Y-scale: 50%
・Sewing speed: 2700 sti/min
・Upper thread tension: 200
...
Additional available
patterns
Set by user
438F 430F / 438F
200 - 999
65 - 199
(800 programs)
1 - 999
Number set when
program is created (512
programs from 200 to
999)
20 - 200
20 - 200
Lo1 - 9
-9.9 - 9.9
-9.9 - 9.9
0 - 300
Initial value
430F 438F
100
100
2700 2300
Lo8 Lo7
0.0
0.0
14 10
1 1
75
5