Output Checking Method - Brother KE-430F Service Manual

4. FUNCTION SETTINGS

4-8. Output checking method

This is used at the following times.
・ When you would like to check for problems with the operation panel
・ When you would like to check for a problem with the drive mechanism
・ When you would like to check for broken cords
You can check whether the signals being output by the CPU are driving the mechanisms correctly.
1. While pressing the
The item number will appear in the PROGRAM No. display (2), and the item name will appear in the menu display (3).
2. Press the key (4) or the
3. For item numbers 51 to 54, press the
* The operation for that check item will be carried out while the key is being pressed.
4. For item numbers 55 onward, depress the foot switch to the 2nd step. (For a 2-pedal foot switch, depress the start
switch.)
* The operation for that check item will be carried out while the foot switch is being depressed.
5. When returning to normal operation, turn power off and then on again.
Item No. Item name
[ 51]
[PM−X]
[ 52] [PM−y]
[ 53]
[PM−P]
[ 54] [PM−n]
28
key (1), turn on the power switch.
key (1) to select the desired item number.
or key (5) to check the operation.
When the
When the
When the
When the
When the
When the
When you press the
When you press the
Operation
key is pressed, the work clamp/button clamp will move to the left.
key is pressed, the work clamp/button clamp will move to the right.
key is pressed, the work clamp/button clamp will move forward.
key is pressed, the work clamp/button clamp will move back.
key is pressed, the work clamp/button clamp will lift.
key is pressed, the work clamp/button clamp will drop.
key, the thread nipper moves toward the home position.
key, the thread nipper moves toward the retract position.
KE-430F, BE-438F
2619B