Reading Memory Switch Data - Brother KE-430F Service Manual

7-6. Reading memory switch data

1
2
3
Ending read/write mode
4
While reading
"MEM" appears in the tension
display
TEST indicator switches off
Select the " r3" SD data read/write mode.
(Refer to "7-3. Preparation for reading and writing data".)
2661B
Press the ENTER key.
・ The buzzer will sound and the memory switch data will
be read from the SD card and stored in the sewing
machine memory, and the memory switch settings will
then be applied.
・ If no memory switch data exists, an error buzzer will
sound.
2662B 2663B
When the display returns to the status in step 1, reading
of the memory switch data is complete.
・ If you would like to use any other read/write modes,
press the
run it.
2661B
Press the TEST key.
2404B
KE-430F, BE-438F
7. USING SD CARDS
or key to select the mode and then
2414B
47