Siemens SINUMERIK 840D sl Function Manual page 756

Punching and Nibbling (N4)
Activation and deactivation
Example 2
The characteristic defines the following acceleration rates:
Distance
between holes
< 3 mm
3 - 8 mm
> 10 mm
(2.05 in)
If a reduced acceleration rate has already been programmed via ACC, then the acceleration
limits defined with PUNCHACC refer to the reduced acceleration rate.
The function is deselected with:
S
min
The acceleration rate programmed beforehand with ACC remains operative.
756
Acceleration
The axis accelerates at a rate corresponding to 75 % of maximum acceleration.
Acceleration is reduced to 25 %, proportional to the spacing.
The axis accelerates at the maximum rate (25 %).
= S = 0
max
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Extended Functions