Siemens SINUMERIK 840D sl Function Manual page 349

4.12.3.6 Signals from channel
DB number Byte.bit
21, ... 24.3
21, ... 40.2, 40.1,
40.0
46.2, 46.1,
46.0
52.2, 52.1,
52.0
21, ... 40.5, 40.4
46.5, 46.4
52.5, 52.4
21, ... 40.7, 40.6
46.7, 46.6
52.7, 52.6
21, ... 41, 47, 53
21, ... 33.3
21, ... 30.0
30.1
30.2
21, ... 30.3
21, ... 30.4
21, ... 37.0
37.1
37.2
21, ... 100.5
101.5
102.5
21, ... 332.5, 332.4
336.5, 336.4
340.5, 340.4
Extended Functions
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Description
DRF selected
Handwheel active (3, 2, 1)
Geometry axis travel request
Plus motion command and minus motion command
Geometry axis active, machine function INC1 ... continuous
Handwheel override active for path axes (SW 2 and higher)
Activate handwheel 1 as contour handwheel;
activate handwheel 2 as contour handwheel;
activate handwheel 3 as contour handwheel
Contour-handwheel simulation ON
Contour-handwheel-simulation negative direction
Handwheel 1 active as contour handwheel;
handwheel 2 active as contour handwheel;
handwheel 3 active as contour handwheel
Handwheel 1 active as contour handwheel;
handwheel 2 active as contour handwheel;
handwheel 3 active as contour handwheel
Orientation axis travel request
Manual and Handwheel Travel (H1)
Data lists
349