Table of Contents
Advertisement
Section 5 - System Operation Manual
(E-Compact ATSC Transmitters - EC701HP thru EC708HP)
5.6.9
Displays the status of the power supply voltages (located at the bottom of the equipment rack).
To verify these tensions in Measurements:
5.7
Alarm System
An alarm is indicated by one of the 3 red LEDs located on the front panel of the digital exciter.
The first LED alarm is for transport stream (TS) absence (SYNC. LOSS). The next LED alarm
is for a current malfunction present on the equipment, and requires investigation, (see CURRENT
ALARM). The third LED indicates a past alarm (see PAST ALARM). This situation indicates that
an alarm is no longer present. On normal operation, just a green LED is ON, which confirms
that the AC input power is present. Once a CURRENT ALARM LED is ON, the origin of the alarm
should be investigated.
5.7.1
If there is an alarm occurrence, this screen shows the current alarms.
Starting from the Main Menu screen:
Manual Rev. 0.1 - February 2018
> >
Power Supply Voltages
>
Select Eqp. Power Supply and press ENTER.
> >
Function available for equipments with more than one drawer power.
Current Alarms
> >
Select System Alarms/Log and press Enter.
NOTE:
5-40
Advertisement
Table of Contents
