Hitachi EC701HP Operation Manual page 95

Section 5 - System Operation Manual
(E-Compact ATSC Transmitters - EC701HP thru EC708HP)
When accessing this screen, by selecting option "YES", the operator will be responsible
for the changes done on this parameter, as well as the effects that these changes may
cause in the equipment if not using the appropriate instruments and test point.
To access the Pre-Correction screen, select "Yes" by using the keys  or . Selecting
NO, the software goes to the previous screen.
Press key ESC to return to Pre-Correction Setup.
Manual Rev. 0.1 - February 2018
> >
Select Non-Linear and press ENTER.
> >
Use the keys or
 
> >
Select Linear and press ENTER.
> >
Use the keys or to enable or disable the pre-correction.
 
Press key ESC to return to Setup Menu.
ATTENTION
to enable or disable the pre-correction.
5-19