Section 5 - System Operation Manual
(E-Compact ATSC Transmitters - EC701HP thru EC708HP)
5.5.1
Commands the software to set the transmission power of the equipment.
Starting from the Main Menu:
To reach the desirable output power level, press the key (2), to increase the power or (4) to
decrease the power.
Once the desirable power level is adjusted, press ENTER for software acknowledgement,
otherwise the change will not become effective.
5.5.2
Under this menu, it is possible to turn ON and OFF the ALC (Automatic Level Control), mute or
do not mute the RF power output on the absence of Transport Stream, and also select being
local or remote the transmitter output level control.
Use the keys or to enable or disable the ALC. Hit key "" to view the next screen.
Manual Rev. 0.1 - February 2018
Power Setup
>
Select Power Setup and press ENTER.
Transmitter Setup
> >
Select Transmitter Setup and press ENTER.
>
Select Setup and press ENTER.
5-15