Remote Management System (Telesupervision); Ip Configuration - Hitachi EC701HP Operation Manual

Section 5 - System Operation Manual
(E-Compact ATSC Transmitters - EC701HP thru EC708HP)
5.8 Remote Management System (Tele-supervision)
All of the equipment parameters such as: transmission power level, power supply measurements,
alarm verification and all the possible functional selections may be accessed two different ways.
Frontal Panel – Through the frontal panel all of the equipment measurements and

configurations may be accessed, as shown in the operation section.
 Local or remote PC virtual.
It is possible to change and/or monitor all of the parameters and measurements as is done at
the frontal panel through the WEB server.
To accomplish this it is necessary to configure the IP / Mask / Gateway.

5.8.1 IP Configuration

Start from the Main Menu.
Manual Rev. 0.1 - February 2018
> >
Select Remote Access and press ENTER.
> >
Select Frontal Ethernet Port and press ENTER.
> >
Select IP Address and press ENTER.
Configure the desired IP by using the keys
Press ESC to the Remote Access screen .
""
Hit key to view the next screen.
or and or .
   
5-47