Table of Contents
Advertisement
Section 6 - Preventive / Corrective Maintenance
E-Compact Transmitters
6.3.3.2 Cleaning
The power drawer air filters (MOD GV 40010) of the medium power transmitters are washable
and can be removed by the front panel of the drawer.
Below is the sequence for removing the air filter.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Screws
Parafusos
front
painel
panel
frontal
Figure 6 - Power Drawer - MOD GV 40010/40033
CAUTION:
It is recommended, periodically to clean the air filter, avoid blocking the air passage
and, consequently, the heating of the transmitter.
If you need to change the air filter, contact the Hitachi Kokusai Linear.
6.3.4 Power Drawer Fan Replacement
Power Drawer MOD GV 40001 (High Power)
For replacement, see the steps below:
Manual Rev. 0.0 - June 2016
Remove the screws from the front panel of the drawer.
Remove the front panel of the drawer.
Remove air filter bolts.
Clean with compressed air, wash with detergent / water, or replace if necessary
Reinstall the air filters by reversing the order of steps above.
Air
Filtro
filter
de ar
Air
Filtro
filter
de ar
Screws
Parafusos
front
painel
frontal
panel
6-9
Advertisement
Table of Contents
