Huawei PDU8000 User Manual page 28

PDU8000 Modular Precision Power Distribution Cabinet
User Manual


Avoid bumping the cabinet, and do not expose it to rain or snow.

Move the PDC to a flat floor using a forklift.
Step 1 Check whether the equipment is correct and intact.
1.
2.
3.
Step 2 Move the PDC close to the installation position. During movement, be careful to avoid
squeezing the MDU screen.
Step 3 Remove the L-shaped brackets from the PDC (one at the front and one at the rear) and pallet,
as shown by (1) in
Step 4 Remove the bolts from the pallet under the PDC, as shown by (2) in
Step 5 Adjust the PDC anchor bolts to ensure that all castors are off the ground, as shown in
4-4.
Step 6 Six people work together to move the PDC away from the pallet, as shown by (3) and (4) in
Figure
Issue 01 (2016-02-27)
Move the cabinet with caution to avoid bumping or toppling. To avoid damaging the
equipment, exercise caution when removing the packing materials.
Check whether the tiltwatch indicator on the carton has turned red. If yes, record the
information and contact the equipment carrier and the local Huawei office immediately.
Visually inspect the equipment appearance to check whether the equipment is
paint-peeling, misshapen, scratched, or soaked. If yes, record the information and contact
the equipment carrier and the local Huawei office immediately.
Check against the packing list that the equipment and fittings are correct and complete. If
some fittings are missing or do not comply with the models in the packing list, record the
information and contact the local Huawei office immediately.
Figure 4-1.
4-1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
Figure 4-1.
Figure
22