Troubleshooting - Huawei PDU8000 User Manual

PDU8000 Modular Precision Power Distribution Cabinet
User Manual
Figure 9-1 Common polarity terminal and common terminal of the transformer
(1) Common polarity terminal

9.4 Troubleshooting

Symptom
The LCD fails to
display branch
currents.
The LCD fails to
display the circuit
breaker status.
The LCD is black or
blinks.
Issue 01 (2016-02-27)
Possible Cause
 The monitoring board communications
cable or the secondary cable to the
corresponding branch current
transformer is not properly connected.
 The current detection module or
current transformer is faulty.

The communications cable of the
Boolean value collection module or the
corresponding branch Boolean value
signal cable is not properly connected.
 The Boolean value collection module
or auxiliary switch contact is faulty.
 The input N wire is disconnected.
 The LCD is faulty.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Operation and Maintenance
(2) Common terminal
Solution
1. Replace the
monitoring board
module.
2. Contact Huawei
technical support.
1. Replace the
monitoring board
module.
2. Contact Huawei
technical support.
 Secure the input N
wire.
 Replace the LCD.
79