User Manual Usage - Huawei PDU8000 User Manual

PDU8000 Modular Precision Power Distribution Cabinet
User Manual
This chapter describes the notes for using the modular precision PDC user guide.
If not otherwise specified, configurations described in this document are for a fully configured PDC
(with three output modules) in the dual-input scenario. Figures in this document are for reference only.








Issue 01 (2016-02-27)
Before using this document, read through and keep in mind the safety precautions and
the cautions and notes for operations.
Before using this document, get familiar with the actual configuration and application
scenario of the modular precision PDC.
Before using this document, make available the documents delivered with each
component.
Put on necessary protective equipment such as the safety helmet and gloves before
entering the site.
Before performing an operation, ensure that the prerequisites are met. Otherwise, the
expected result may not be achieved. More seriously, equipment damage and personal
injury may occur.
The system configuration parameters are essential to reliable running of the system.
Improper modifications of parameters may easily cause abnormal running status, or even
damage to the system. You are not allowed to modify configuration parameters without
permission when using the modular precision PDC. If a modification is necessary,
contact Huawei technical support. Huawei shall not be responsible for any loss caused by
unauthorized configuration modification.
Some parameters mentioned in this document should be provided and configured by
onsite technical support engineers based on the actual application of the modular
precision PDC.
Operations marked as optional in the chapters, sections, or procedures can be performed
depending on the actual configuration and requirements of the modular precision PDC.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1

User Manual Usage

1 User Manual Usage
1