Troubleshooting; Troubleshooting; Suspension And Steering - Toro Workman GTX Electric & Lithium Service Manual

Troubleshooting

Suspension and Steering

Problem
Front end is noisy.
Rear end is noisy.
Excessive steering play.
Vehicle is unstable or wanders.
Chassis
Possible Cause
Front wheel lug nuts are loose.
Front suspension struts are loose or worn.
Front wheel bearings are loose or worn.
Front end components (e.g. tie--rod, spindle, A--arm) are loose or
worn.
Steering rack assembly is damaged or worn.
Rear wheel lug nuts are loose.
Rear suspension shocks are loose or worn.
Rear wheel bearings are loose or worn.
Rear end components (e.g. rubber bushing, stabilizer, anti--sway
bar, A--arm) are loose or worn.
Transaxle problem (see Chapter 4 -- Transaxle).
Front wheel lug nuts are loose.
Front wheel bearings are loose or worn.
Steering shaft joints are loose or worn.
Tie rod ends are loose or worn.
Bushings in spindle or A--arm are loose or worn.
Steering rack assembly is damaged or worn.
Tire pressure is low or uneven between tires.
Wheel lug nuts are loose.
Front wheel bearings are loose or worn.
Steering shaft bushings are worn.
Front wheel alignment (toe--in) is incorrect.
Bushings in spindle or A--arm are loose or worn.
Rubber shock insert in front suspension strut is loose or worn.
Steering rack assembly is damaged or worn.
Page 5 - - 6 Workman GTX Electric