Steering Rack Assembly Service - Toro Workman GTX Electric & Lithium Service Manual

Steering Rack Assembly Service

1. Tie rod end (2 used)
2. Jam nut (2 used)
3. Tie rod track (2 used)
NOTE: Check parts catalog to identify individual com-
ponents that are available for the steering rack assem-
bly on your Workman GTX vehicle. Depending on wear
or damage that exists with the steering rack, replace-
ment of the complete steering rack assembly might be
necessary.
Chassis
7
8
Figure 28
4. Bellows clamp (2 used)
5. Bellows (2 used)
6. Bellows clamp (2 used)
Page 5 - - 32
6 5
3
Medium Strength
Thread Locker
7. Input shaft seal
8. Steering rack assembly
45 to 50 ft- -lb
(61 to 75 N- -m)
4
2
34 to 42 ft- -lb
(47 to 57 N- -m)
Workman GTX Electric
1