Front Fenders, Hood And Bumper - Toro Workman GTX Electric & Lithium Service Manual

Front Fenders, Hood and Bumper

(0.8 to 1.4 N- -m)
18 to 22 in- -lb
(2.1 to 2.4 N- -m)
RIGHT
FRONT
1. Bumper
2. LH headlight bracket
3. RH headlight bracket
4. Washer head screw (8 used)
5. Headlight assembly (2 used)
6. Speed clip (6 used)
7. Hood
8. Clevis pin (2 used)
9. Spring pin (2 used)
Chassis
7 to 13 in- -lb
10
19
11
13
3
1
22
5
12
15
16
10. Retainer pin (2 used)
11. Washer head screw (6 used)
12. LH front fender
13. RH front fender
14. Flange head screw (4 used)
15. Flat washer (4 used)
16. Flange nut (4 used)
17. Washer head screw (2 used)
8
9
4
2
14
6
25
24
Figure 41
Page 5 - - 44
7
20
18
18 to 22 in- -lb
(2.1 to 2.4 N- -m)
40 to 45 in- -lb
17
(4.6 to 5.0 N- -m)
200 to 230 in- -lb
(23 to 25 N- -m)
40 to 45 in- -lb
(4.6 to 5.0 N- -m)
23
18. Screw (2 used)
19. Hold down strap (2 used)
20. Lock nut (2 used)
21. Washer head screw (4 used)
22. LED bulb (2 used)
23. Angle bracket (2 used)
24. Flange nut (4 used)
25. Flat washer (2 used)
Workman GTX Electric
21