18
Cyclic Synchronous Position Mode Objects
18.1
[Position offset (Obj. 60B0h)]
[Position offset (Obj. 60B0h: 00h)]
Data Type
Access
I32
RW
Description
Set the position offset.
18.2
[Velocity offset (Obj. 60B1h)]
[Velocity offset (Obj. 60B1h: 00h)]
Data Type
Access
I32
RW
Description
Set the velocity offset.
The description of the object varies as shown in the table below, depending on the combination of the setting of [Pr. PT01.1
Speed/acceleration/deceleration unit selection] and the connected servo motor.
[Pr. PT01.1]
0 (encoder unit)
1 (command unit)
18.3
[Torque offset (Obj. 60B2h)]
[Torque offset (Obj. 60B2h: 00h)]
Data Type
Access
I16
RW
Description
Set the torque offset.
18 Cyclic Synchronous Position Mode Objects
118
18.1 [Position offset (Obj. 60B0h)]
Mapping
Default
RXMAP
0
Mapping
Default
RXMAP
0
Connected servo motor
Rotary servo motor
Linear servo motor
Mapping
Default
RXMAP
0
Range
Units
80000000h to
pos units
7FFFFFFFh
Range
Units
-2147483648 to
vel units
2147483647
Units
0.01 r/min
0.01 mm/s
pulse/s
Range
Units
-32768 to 32767
0.1 % (with rated
torque being 100
%)
Save
Parameter
Impossible
Save
Parameter
Impossible
Save
Parameter
Impossible