HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
7.1 Commissioning Video Effects
Prerequisites
Before commissioning video effects, ensure the following:
l
l
l
l
l
The following figure shows the procedure for commissioning the camera.
Command and Parameter Description
Command syntax: Camera setc500CameraParam command field:value camport:5
Example: To set the exposure mode to manual exposure, run camera setc500CameraParam
exposure:1 camport:5.
Parameter description
Issue 01 (2015-02-12)
The video captured by each lens of the tri-lens camera is displayed properly on the HD
displays.
The telepresence codecs' input and output parameters, especially the camera type and the
control serial port, have been set correctly.
The HD display parameters, such as the picture size and color, have been set correctly.
The video resolution, cable mode, and zoom value of the camera have been set correctly.
The natural light is kept out by the curtains. The lights in the conference room have been
turned on and the color temperature of the light sources in the room is the same.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Appendix
7
Appendix
145