Huawei TP3106 Commissioning Manual page 83

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
Procedure
Step 1 Configure general settings, as shown in
Figure 4-34 General settings
Issue 01 (2015-02-12)
NOTE
If the customer's network does not use 4E1 lines, skip step 4 in the procedure. Before configuring system
settings, connect the center telepresence codec to the telepresence host. If the center telepresence codec is
not connected, some parameter settings will not available on the System Settings page. Please set the
as system language for Traditional Chinese characters using regional and the site name
and address book must be edited in traditional Chinese.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-34.
4 Parameter Configuration
75