Huawei TP3106 Commissioning Manual page 165

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
Procedure
Step 1 Telnet to the telepresence codecs.
To telnet to the telepresence codec whose IP address is 10.11.250.61, do the following: Choose
Start > Run. In the Run dialog box, enter telnet 10.11.250.61, and press Enter. On the displayed
window, enter debug for both the login name and the password.
The window shown in the following figure is displayed.
Step 2 Query the camera's current settings.
Run camctrl camzoomsetting inquire on.
The window similar to the one shown in the following figure is displayed.
Step 3 Check the settings of the auxiliary parameters.
Generally, you do not need to manually change the settings of the auxiliary parameters during
deployment. If the settings displayed in the query result are different from the default (standard)
settings, reset the parameters by running the relevant commands.
Issue 01 (2015-02-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Appendix
157