Huawei TP3106 Commissioning Manual page 86

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
l Settings of the site name, site name color, display duration, and site name position are saved
l Language specifies the UI language. Its default value is English.
l By default, HTTPS settings is set to Enable. If it is set to Disable, HTTP is used for
l Line type specifies the line types supported for placing calls.
l Select all options under Icon Superimposition.
Step 2 Configure network settings, as shown in
Issue 01 (2015-02-12)
Parameter
Daylight saving time
Enter sleep mode
Date format
Enable NTP
NTP server address
Date
System time
to the telepresence codecs. Other parameter settings are saved to the telepresence host.
connections.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value
Disable
10min
YYYY/MM/DD
Disable
-
2012/02/11
14:32:09
Figure 4-35 and Table
4 Parameter Configuration
Remarks
Recommended value.
You can also select
Enable according to the
site requirement.
Recommended value.
Recommended value.
Set this parameter as
required.
Set this parameter when
NTP is enabled.
Set this parameter as
required.
Set this parameter as
required.
4-24.
78