Huawei TP3106 Commissioning Manual page 94

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
Parameter
Network Manager
The administrator and touch panel user's names cannot be changed. After changing the
passwords, use the new passwords for connections. To implement the unified network
management function of the Service Management Center (SMC), Account status must be set
to Enable for the API server user, and the SMC IP address must be set in Network Manager.
Step 4 Configure 4E1 settings, as shown in
If 4E1 lines are not used on the network, you can skip the following steps for configuring 4E1
settings.
Figure 4-41 4E1 settings
Table 4-28 4E1 settings
Parameter
Account
Password
Issue 01 (2015-02-12)
IP address 1
IP address 2
IP address 3
NOTE
When 4E1 lines are used for calls, you need to complete the following settings:
l Choose Settings > General Conference Settings and set Dial number type to 4E1.
l Choose Settings > Advanced Settings and set Default call type to 4E1 in Conference Settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value
-
-
-
Figure 4-41 and Table
Value
123
-
4 Parameter Configuration
Remarks
Depending on the
actual configuration.
Set this parameter as
required.
Set this parameter as
required.
4-28.
Remarks
Set this parameter as
required.
Set this parameter as
required.
86