Huawei TP3106 Commissioning Manual page 71

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
Parameter
Slot 11
The ports arrangement on the Wizard-Video Ports page is consistent with the physical ports
arrangement on the telepresence host. Select the devices currently connected to those ports and
click Next.
Telepresence system can show the remote presentation on projector and other display equipment.
If users need this function, configure corresponding video port. For example, if set the output
port 4 of slot 10 as external display device, then press "send presentation" on touch panel to
activate this function.
Step 7 Configure codec video output, as shown in
Issue 01 (2015-02-12)
Input Ports
Output Ports
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value
Port 3 Tabletop
display
Port 4 External display
device
Port 1 Left codec
remote video
Port 2 Right codec
remote video
Port 3 No device
connected
Port 4 No device
connected
Port 1 Left codec video Fixed value.
Port 2 Right codec
video
Port 3 No device
connected
Port 4 No device
connected
Figure 4-22 and Table
4 Parameter Configuration
Remarks
Fixed value.
Set the
parameter based
on the site
requirement.
Fixed value.
Fixed value.
Fixed value.
Fixed value.
Fixed value.
Fixed value.
Fixed value.
4-13.
63