How To Set And Add A Pdu2000 - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
----End

5.3.12 How to Set and Add a PDU2000?

Prerequisites
One end of the straight-through cable has been connected to the COM 1 or COM 2 port on the
PDU2000, and the other end has been connected to the COM port on the ECC800 collector,
rack environment unit, or ETH converter.
Context
Table 5-8 PDU2000 basic Information
Vendor
Clever
Haipengxin
a: The barcode starts with 21 and is attached to the device.
Procedure
Step 1 Set the PDU2000 monitoring parameters.

Issue 07 (2020-03-16)
PDU8000 and ECC800 are running properly, and whether the input parameters are
consistent with the PDU8000 parameters.
Name Displayed on
the WebUI
PDU2000-M (C)
PDU2000-M (H)
Set the PDU2000-M (C) monitoring parameters.
The display of a single-phase module is used as an example.
− After the PDU2000-M (C) is powered on, the LCM displays the initialization
screen.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
Eleventh and Twelfth Characters in
Device Barcode
a
FT
6B
99