How Can I Synchronize Device Parameters - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Step 4 Click Export Fault Information.
Step 5 Save the exported data to the PC or U disk.
----End

9.1.13 How Can I Synchronize Device Parameters?

Context


Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose Maintenance > Parameter Sync.
Step 3 Select a value from the Device type drop-down list box.
Step 4 Specify source device and target device, click Submit.


When synchronizing the device parameters, ensure that the target device is communicating
properly with the ECC800; otherwise, the synchronization will fail.
Issue 07 (2020-03-16)
Record the password for decompressing the data package.
Do not delete the source devices before replacing devices.
After replacing devices, you can choose to synchronize configured device parameters to
the target devices.
Figure 9-2 Monitoring
Source Device: device before replacement
Target Device: device after replacement
Copyright © Huawei Technologies Co., Ltd.
9 FAQ
195