How Can I Synchronize Device Parameters - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
If Encryption password for export is selected, the exported data package will be encrypted,
and you need to enter the encryption password to decompress the data package. To ensure
data security, you are advised to select Encryption password for export.
Step 4 Click Export Fault Information.
Step 5 Save the exported data to the PC or U disk.
----End

9.1.10 How Can I Synchronize Device Parameters?

Context
After a device is replaced, you can synchronize the parameters of the original device to the
new device.
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose Maintenance > Parameter Sync.
Step 3 Select a value from the Device type drop-down list box.
Step 4 Specify source device and target device, click Submit.


If communication between the ECC800 and the device is interrupted during parameter
synchronization, the synchronization fails. Ensure that the ECC800 and the device
communicate properly and synchronize parameters again.
----End
Issue 06 (2020-01-02)
Record the password for decompressing the data package.
Source Device: device before replacement
Target Device: device after replacement
The source device can be a device that communicates properly or fails to communicate, but the target
device must be a device that communicates properly.
Copyright © Huawei Technologies Co., Ltd.
9 FAQ
189