Huawei ECC800 User Manual page 141

ECC800 Data Center Controller
User Manual
4.
5.
6.
Step 3 Set an alarm for card readers.
Set Logical level configuration for reader removed based on the fingerprint reader
configured for the access control system.

Issue 06 (2020-01-02)
An authorized IC card can be used to open both the access control device and the cabinet magnetic lock.
Figure 5-17 Adding access permissions
In the displayed prompt box, click OK.
Click Synchronize Permission, select the modified access control devices, and click
Start Synchronization.
Figure 5-18 Synchronizing access permissions
When Synchronization Status is Synchronized for the related devices, close the
Synchronize Access Permission page.
If the access control system uses a Card and password reader, choose Monitoring >
Aisle > Access Actuator Group > Access Actuator n on the ECC800 WebUI, click
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
132