Commissioning Cameras And A Vcn500 (Smart Eth Gateway Networking Scenario) - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
5.
----End
5.11 Commissioning Cameras and a VCN500 (Smart ETH
Gateway Networking Scenario)
Figure 5-19 Video system networked over a smart ETH gateway
Set the internal and external IP addresses as planned by the customer. The following IP
addresses are just examples.
Table 5-36 IP address plan
Device
Camera
VCN500
Issue 06 (2020-01-02)
After the networking is complete, if the ALM indicator on the CIM is steady on, the number of devices
online is smaller than the value of BIM Number. Check that BIM Number is set to a correct value and
that the BIM is successfully networked.
(Optional) If multiple CIMs are cascaded, repeat
networking for remaining CIMs and BIMs.
Internal IP address
Example: 192.168.248.50; range:
192.168.248.50–192.168.248.99
Example: 192.168.248.55; range:
192.168.248.50–192.168.248.99
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
Step 4.1 to Step 4.4 to perform
External IP address
Camera external IP
address
VCN500 external IP
address
136