Huawei ECC800 User Manual page 81

ECC800 Data Center Controller
User Manual
Indicator
ALM
PWR
Networking Switch
Table 3-65 Networking switch description
Name
Button pressing
Button pressing
Button holding down
Issue 06 (2020-01-02)
Color Meaning
Red Alarm indicator
Green Power indicator
 If an indicator blinks at long intervals, it is blinking at 0.5 Hz, that is, on for 1s and then off for 1s.
 If an indicator blinks at short intervals, it is blinking at 4 Hz, that is, on for 0.125s and then off for
0.125s.
 If an indicator blinks at super short intervals, it is blinking at 10 Hz, that is, on for 0.05s and then off
for 0.05s.
 Blinking intermittently at super short intervals means an indicator blinks at super short intervals for
0.5s and then remains off for 0.5s.
Definition
Press the button for
less than 1s.
Press and hold the
button for more than
1s but less than 5s.
Press and hold the
button for more than
10s but less than 20s.
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady The actual
on
number of
online devices is
less than the
value of BIM
number.
Off The actual
number of
online devices
equals the value
of BIM number.
Steady Board power
on indicator.
Function
CIM blinking function
Creates a network if no network has
been created. Switches between network
organization and data transmission if a
network has been created.
Clears the current network (including
the network parameters of all the online
BIMs).
3 Device Description
Measure
contact
Huawei
technical
support.
Check the value
of BIM number,
the BIM cable
connection, and
the BIM
indicators.
Requires no
handling.
Requires no
handling.
72