App Introduction; Preparations And App Login - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual

4.2 APP Introduction

4.2.1 Preparations and App Login

Prerequisites
The following lists the operating environment specifications for the app.





Procedure
Step 1 Download the app installation package using any of the following three methods:



Step 2 Install the app.
By default, the Android operating system forbids the installation of applications not obtained
from the Android market. Therefore, before installing the app, set the mobile phone so that it
allows the installation of applications from unknown sources.
1.
Step 3 Enable the WiFi function on the ECC800 WebUI.
1.
2.
3.
4.
5.
6.
Issue 06 (2020-01-02)
The mobile device must run Android 4.0 or later and is not root operating system (the
operating system is not flashed).
The mobile device must have sufficient space for installing the new app. The size of the
app installation package is about 7 MB, and the size of files after app installation is about
11 MB.
The mobile device has sufficient battery reserve.
You have obtained the IP address of the ECC800 as well as the user name and password
used for WebUI login.
A PC with an IP address in the same network segment as that of the ECC800 is prepared,
and the PC has connected to port WAN_1 on the ECC800.
Log in to the HUAWEI app store(http://a.vmall.com/) or Google Play, search for
FusionModule, and tap Download.
Log in to the ECC800 WebUI using a PC. Choose Maintenance > APP Download,
click Download APP, and save the app installation package to the PC or a path on the
mobile storage device. Then, copy the app installation package to a mobile phone or pad.
When the WiFi is enabled, enter https://192.168.245.10 in the address bar of the Firefox
browser (version 41.0 or later) on a mobile phone or pad, and press Enter to access the
ECC800 WebUI. Choose Maintenance > APP Download and click Download APP to
save the app package to the mobile phone or pad.
Tap the app installation file for installation. After the installation is complete, check that
the app icon is displayed on the home screen of the mobile phone or pad.
Log in to the ECC800 WebUI as an administrator.
Choose Monitoring > System > WiFi Converter and click WiFi Management.
Set Enable WiFi to Enable and click Submit.
If this is the first time you enable the WiFi function, set WiFi Password and click OK.
Enter the password currently used for logging in to the WebUI and click Submit.
Specify WiFi SSID and WiFi Password and click Submit to change the SSID and
password.
Copyright © Huawei Technologies Co., Ltd.
4 UI Description
85