Commissioning Ipc6325 Cameras - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
3.
4.
5.
Step 3 (Optional) Deploying IVS in Stack Mode. For details, see
Mode.
Step 4 (Optional) Deploying MPUs in Cluster Mode. For details, see
Cluster
----End

5.12.2 Commissioning IPC6325 Cameras

Prerequisites
For details about how to commission cameras and set parameters for them, see the document
delivered or click
If multiple cameras are accessed, retain the connection of one camera and disconnect
connections from other cameras. After commissioning the connected camera, commission
other cameras in the same way.
Procedure
Step 1 Log in to the camera WebUI.
1.
2.
Step 2 Preview the site situation in real time and check the camera coverage through videos. Adjust
the lens if necessary.
Issue 06 (2020-01-02)
Select the server that the camera needs to access, set Module name to SCU and
Parameter type to System property, and click Search.
Figure 5-27 Configuring Camera NTP Synchronization
In the search results, click Edit in the row where Parameter Name is NTPIPC and set
Value to 1.
Click Save. After the camera NTP synchronization function is enabled, the camera, after
being connected to the server, will automatically time-synchronize with the server.
Mode.
here to download the document.
Configure the PC IP address and the camera IP address in the same network segment.
Enter the camera IP address (192.168.0.120 by default) in the address bar of the Internet
Explorer and press Enter button.
Enter the preset user name admin and the preset password HuaWei123, and click Log
In.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
(Optional) Deploying IVS in Stack
(Optional) Deploying MPUs in
146