Huawei ECC800 User Manual page 28

ECC800 Data Center Controller
User Manual
Indicator Color
ALM Red
3G Green
RF_Z Green
Issue 06 (2020-01-02)
Name
indicator
Alarm indicator
3G status indicator
Communication status
indicator
Copyright © Huawei Technologies Co., Ltd.
Status Description
program is being loaded, or WiFi
WPS is pairing.
Off The power supply is abnormal.
Blinking at long The software runs properly (the
intervals indicator blinks at 0.5 Hz, on for 1s
and then off for 1s) or the ECC800
registers with the NetEco
successfully.
Blinking at The ECC800 does not register with
short intervals
the NetEco (the indicator blinks at 4
Hz, on for 0.125s and then off for
0.125s).
Steady on A system failure alarm is generated.
Off The system is normal.
Steady on The 3G module is powered on.
Off The 3G module stops running, or no
3G module is configured.
Blinking at long The 3G module succeeds in dial-up
intervals (the indicator blinks at 0.5 Hz, on for
1s and then off for 1s).
Blinking at The 3G module registers with the
short intervals operator network successfully (the
indicator blinks at 4 Hz, on for 0.125s
and then off for 0.125s).
Steady on No network parameters exist, or a
network is to be created.
Blinking at long A network is set up, and no node
intervals access is allowed (the indicator blinks
at 0.5 Hz, on for 1s and then off for
1s).
Blinking at A network is set up, and node access
super short is allowed (the indicator blinks at 10
intervals
Hz, on for 0.05s and then off for
0.05s).
3 Device Description
19