Adding And Setting A Sunrise-Scu-20K - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
3.
4.
----End

5.3.4 Adding and Setting a SUNRISE-SCU-20K

Prerequisites
In this example, a straight-through cable is used to connect the SUNRISE-SCU-20K to the
COM port on the ETH converter.
When connecting devices, you are advised to add devices one by one and ensure that the view
is consistent with the real object. If all devices have been added and powered on, only the
BLINK function of the ETH converter can be used to identify the mapping between the
SUNRISE-SCU-20K and ETH converter.
Procedure
Step 1 Set the SUNRISE-SCU-20K monitoring parameters.
1.
2.
Step 2 Add a SUNRISE-SCU-20K.
1.
2.
Table 5-4 Adding a SUNRISE-SCU-20K
Path
Home > Device
Management
Issue 06 (2020-01-02)
Click Connect Test to check whether the UPS5000-E connects to the ECC800 properly.
− If the UPS5000-E connects to the ECC800 properly, click Add Device.
− If the UPS5000-E does not connect to the ECC800 properly, check whether the
cable between the UPS5000-E and the ECC800 is connected properly, whether the
UPS5000-E and ECC800 are running properly, and whether the input parameters
are consistent with the UPS5000-E parameters.
Choose Monitoring > System > ETH Converter Group > ETH Converter n >
Running Parameters and set Device name to ETH Converter_device position.
After SUNRISE-SCU-20K startup, tap Settings on the home screen and enter the
password 111111 to enter the parameter settings screen.
Choose Settings > Comm Settings, and set Monitoring baud rate to 9600 and
Monitoring address to 1-8 on the displayed communication settings screen.
 For the SUNRISE-SCU-20K, the default values of Monitoring address is 1.
 If multiple SUNRISE-SCU-20K is connected to a same smart module, ensure that each monitoring
address of a SUNRISE-SCU-20K is unique.
 Ensure that the baud rate of the SUNRISE-SCU-20K is consistent with that of the COM port on the
ETH converter.
Log in to the ECC800 WebUI as an administrator.
Follow the instructions in the following table to add the SUNRISE-SCU-20K.
Item
Device type
Connect to
Copyright © Huawei Technologies Co., Ltd.
Setting
Select SUNRISE-SCU-20K from the drop-down
list box.
Select ETH Converter n from the drop-down list
box.
5 Power-On Commissioning
95