Cim - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Figure 3-31 CIM and BIM networking (in the scenario with battery cabinets)
When a battery system needs to be managed by multiple CIMs, the CIMs can be connected to
northbound devices using straight-through cables (the ECC supports four CIMs in parallel
through the smart ETH gateway) without cascading.
networking.
Figure 3-32 CIM communications cable connecting to a smart ETH gateway

3.3.19.1 CIM

CIM is a battery information collection module. It collects battery status data from the
downstream BIM groups through wireless communication, and sends the data to the ECC,
UPS, and the third-party network management system (NMS) through COM or PoE ports.
Features







Issue 06 (2020-01-02)
Collects battery data detected by the BIM through wireless communication.
Each CIM can manage a maximum of four battery strings or 300 batteries.
An external Hall effect sensor is connected to monitor the current of each battery string.
Calculates the SOC and SOH of batteries and battery strings.
Accurately identifies weak batteries in a battery string.
Identifies loose battery terminals and battery terminal overtemperature, and controls
battery switch tripping.
Supports WebUI display, northbound communication over FE and RS485, and a
third-party NMS.
Copyright © Huawei Technologies Co., Ltd.
3 Device Description
Figure 3-32 shows the system
63