Commissioning Cameras And A Vcn500 (Lan Switch Networking Scenario); Configuring The Vcn500 - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual



Step 4 Click Confirm after video information is entered.
Step 5 Click Access Link to access the link to the camera WebUI as prompted.
----End
5.12 Commissioning Cameras and a VCN500 (LAN Switch
Networking Scenario)
It is recommended that cameras be allocated to each VCN500 equally if multiple smart
modules share a VCN500.
Figure 5-25 Video system networked over a LAN switch

5.12.1 Configuring the VCN500

Prerequisites
For details about the VCN500 hardware description and installation, see the "Hardware
Guide" in the VCN500 V100R002C20 Product Documentation. For details about the VCN500
configuration, see the "Configuration Guide." For more details, see the document delivered
with the device or click
Issue 06 (2020-01-02)
External IP: Enter the external IP address of the camera (the actual IP address planned
by the customer prevails).
Internal IP: Enter the internal IP address, that is, the IP address of the camera (for
example, 192.168.248.50).
Access link: Enter the external IP address of the camera (for example, https://external IP
address of the camera).
here
The version number is subject to the Quick Start delivered with the VCN500. The description and link in
this document are for reference only.
Copyright © Huawei Technologies Co., Ltd.
to download the document.
5 Power-On Commissioning
144