ECC800 Data Center Controller
User Manual
Step 3 (Optional) If you use the SD card when no VCN500 is configured, format the SD card
instantly and set Video Plan and enable the plan.
Step 4 Choose Settings > Network Configuration > Network Parameters, and set IP address,
Subnet mask, and Gateway IP address for the camera according to the site plan.
Step 5 The coding protocol of primary stream and secondary stream1 is setting to H.264.
Figure 5-28 Setting coding protocol
----End
5.12.3 Commissioning IPC6321 Cameras
Prerequisites
For details about how to commission IP cameras and set parameters for them, see the
document delivered or click
If multiple cameras are accessed, retain the connection of one camera and disconnect
connections from other cameras. After commissioning the connected camera, commission
other cameras in the same way.
Issue 06 (2020-01-02)
here
to download the document.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
147