Access Actuator - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Indicator
ALM

3.3.3 Access Actuator

The access actuator is the control component for the aisle door in a smart module. It connects
to the ECC800 controller over FE port, wireless networking (802.15.4). It opens the magnetic
lock by detecting the card swiping information of the card reader, door open button
information, and fire linkage information. It has access right management, access event record,
and alarm record functions.
Figure 3-8
Figure 3-8 Access actuator
(1) 48 V power port
(4) RS485 port
COM1
(7) BLINK button
(10) AI/DI_2 dry
Issue 06 (2020-01-02)
Color Name
Red Alarm
indicator
shows an access actuator.
(2) PoE port
(5) Address DIP switch
(8) WG_2 Wiegand
interface
(11) AI/DI_1 dry
Copyright © Huawei Technologies Co., Ltd.
Status Description
Blinking The indicator blinks at super
short intervals for 0.5s
(blinking at 10 Hz, on for
0.05s and then off for 0.05s)
and then turns off for 0.5s.
The cycle lasts for 10s.
Steady on A system failure alarm is
generated.
Off No system alarm is
generated.
(3) RS485 port COM2
(6) Status indicator
(9) WG_1 Wiegand interface
(12) LOCK/GND/GATE/GND/door
3 Device Description
31