Ac Actuator - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Communications Ports
The access actuator provides one DO port (LOCK/GND) and one DI port (GATE/GND).
Table 3-23
Table 3-23 LOCK/GND/GATE/GND port pin definitions
Item
LOCK/GND (control
magnetic locks) pin
sequence
GATE/GND (door
status) pin sequence

3.3.4 AC Actuator

The AC actuator is used in a smart module to control the lighting inside the smart module by
receiving commands from the access control system or host, infrared linkage information
(disabled by default), or signals from the light button. It also provides a charging port for the
pad. The AC actuator can connect to the ECC800 controller by wireless networking
(802.15.4).
Figure 3-9
Figure 3-9 AC actuator
(1) AC OUT2 port
(5) BLINK button
Issue 06 (2020-01-02)
lists the LOCK/GND/GATE/GND port pin definitions.
LOCK
GND
GATE
GND
shows an AC actuator.
(2) AC OUT1 port
(6) AI/DI dry
contact
Copyright © Huawei Technologies Co., Ltd.
Description
12V_OUT
GND
DI1
GND
(3) AC IN port
(7) COM1–2 RS485
port
3 Device Description
(4) Status indicator
34