Ac Actuator - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Indicator
RF_Z

3.2.6 AC Actuator

The AC actuator is used in a smart module to control the lighting inside the smart
module by receiving commands from the access control system or host, infrared
linkage information (disabled by default), or signals from the light button. It also
provides a charging port for the PAD (AC OUT2).
Issue 02 (2020-09-07)
Color Name
Green Communicati
on status
indicator
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on No network parameters
exist, or a network is to be
created.
Blinking at A network is set up, and no
long node access is allowed (the
intervals indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
Blinking at A network is being set up,
super short and node access is allowed
intervals (the indicator blinks at 10
Hz, on for 0.05s and then off
for 0.05s).
Blinking The smart module actuator
intermittent is searching for a network
ly at super (the indicator blinks at super
short short intervals for 0.5s and
intervals then turns off for 0.5s).
3 Device Description
47