Facial Recognition; Recording Facial Data - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Table 6-48 Function commissioning
Check Method
Check the running
information about the
T/H sensor on the
WebUI.
Set T/H sensor alarm
thresholds.
----End

6.13 Facial Recognition

6.13.1 Recording Facial Data

Prerequisites
The FusionModule app has been installed on the pad.
Procedure
1.
2.
3.
Issue 02 (2020-09-07)
You have logged in to the FusionModule app on the pad as an administrator.
On the main screen of the app, tap
Face Account Management. After reading the message, tap OK.
Click Add to start recording facial data.
NO TE
The facial data is used only for configuring the facial recognition function and is not
used for other purposes. The facial data is encrypted during transmission in the
ECC800-Pro to ensure that the personal data of users is fully protected.
Copyright © Huawei Technologies Co., Ltd.
Normal Connection Status
Choose Monitoring > Cabinet > IT Cabinet n > T/H
Sensor n > Running Info, and check the current T/H
and NTC information of the cabinet.
Choose Monitoring > Cabinet > IT Cabinet n > T/H
Sensor n > Running Parameters, and set High
temperature alarm threshold, Low temperature
alarm threshold, High humidity alarm threshold, and
Low humidity alarm threshold as required.
NOTE
The default values of High temperature alarm threshold,
Low temperature alarm threshold, High humidity alarm
threshold, and Low humidity alarm threshold are 30.0°C,
5.0°C, 85.0% RH, and 15.0% RH, respectively.
. On the displayed Edit page, select
6 Feature Description
232