Huawei ECC800-Pro User Manual page 133

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Step 2 Add a PDU2000.
1.
2.
3.
Issue 02 (2020-09-07)
Figure 5-12 PDU2000-M (H) communications settings
– Press DOWN and UP to select the address to be set.
– Press MENU to confirm the settings.
NO TE
If modification is successful,
Log in to the ECC800-Pro WebUI as an administrator.
Add a PDU2000.
Table 5-13 Adding a PDU2000
Path Parameter
Choose Device
System attribute
Settings >
Device Type
Device
Management
and click Add
Device. The
Connect To
parameters
for adding
devices are
displayed.
Communicati
ons Port
Device
Address
Click Test Connect to check whether the PDU2000 connects to the ECC800-
Pro properly.
– If the connection succeeds, click Confirm. The connected devices are
displayed in the Number of connected devices list.
Copyright © Huawei Technologies Co., Ltd.
is displayed:
Setting
Select PDU from the drop-down list box.
Select PDU2000-M (C) or PDU2000-M
(H) from the drop-down list box based on
the actual device.
Select ETH Actuator1 from the drop-down
list box.
NOTE
The setting example indicates that the
PDU2000 is connected to the ETH Actuator1.
COM1/COM2
Enter the actual device address of the
PDU2000.
5 Power-On Commissioning
is displayed: If modification fails,
122