Viewing The Power Usage - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
1.
2.
3.
----End

6.11.3 Viewing the Power Usage

Prerequisites
Power distribution devices have been connected to the ECC800-Pro.
Procedure
Step 1 View the power information on the ECC800-Pro WebUI.
1.
2.
3.
4.
5.
Step 2 View the power information on the ECC800-Pro app.
1.
2.
3.
----End
Issue 02 (2020-09-07)
Choose Monitoring > Cabinet > Running Parameters and click Smart
Distribution Information.
Set rPDU auto close enable to Enabled.
If the user has no special requirements, choose Monitoring > Cabinet > IT
Cabinet > rPDU > Running Parameters and retain the default value of
Branch Auto Close Current Parameter.
Log in to the ECC800-Pro WebUI as an administrator.
Choose Monitoring > Cabinet to access the Electricity Information in Each
Cabinet page.
View the power usage information about each cabinet, such as the Current
Power (kW), Power Consumption (kWh), and Load Percentage (%).
Choose Monitoring > System. In the Power Information area on the
Running Info tab page, you can view the power information about the smart
module.
Choose Home > Plan View. In the PUE area, you can view the transient
mPUE.
NO TE
– Transient mPUE = Total input power/Total IT power of the smart module. For example,
if a PDU8000 with the total input power of 5 kW connects to the smart module, whose
total IT power is 3.6 kW, the transient mPUE = 5 kW/3.6 kW = 1.39.
– If the power management is not configured, the PUE area in Plan View displays the
average PUE.
– Instant is displayed for a transient mPUE.
Connect the pad to the WiFi network of the ECC800-Pro in the room.
Choose Home > Power to view the proportion of used power for each
cabinet.
Choose Home > Resource > Power to view the real-time power and rated
power for the entire smart module as well as the real-time power for each
cabinet, and check whether the used power exceeds the alarm threshold.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
222