Commissioning An Emergency Door Release Button; Video Management; Preparing Documentation - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Step 5 Check functions of the magnetic lock.
Table 6-16 Function commissioning
Check Method
When the aisle door is
normally closed, check
whether there is a door
open alarm on the
ECC800-Pro.
----End

6.4.4 Commissioning an Emergency Door Release Button

Procedure
Step 1 Check the function of an emergency door release button.
Table 6-17 Function commissioning
Check Method
When the room door is
properly closed, short-
circuit the wiring
terminals NC and COM
or NO and COM on the
emergency door release
button.
----End

6.5 Video Management

6.5.1 Preparing Documentation

Before commissioning a camera, prepare the following documents in addition to
this document.
Issue 02 (2020-09-07)
Normal Connection
Status
There is no door
open alarm on the
ECC800-Pro.
Normal Connection
Status
The room door is opened
properly.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
Troubleshooting
If a door open alarm is
reported when the door is
closed, relocate the
magnetic lock and magnet
to minimize the deviation
until the door open alarm
is cleared.
Follow-up Procedure
Remove the short-circuit
cable from the wiring
terminals NC and COM
or NO and COM on the
emergency door release
button.
142