How Can I Add And Set The Smart Module Actuator (Modbus-Mac); How Can I Set And Add A Pdu8000 (Modbus Rtu) - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)

8.1.7.12 How Can I Add and Set the Smart Module Actuator (Modbus-MAC)?

Prerequisites
One end of the straight-through cable has been connected to the LAN port on the
smart module actuator, and the other end has been connected to the PoE port on
the smart ETH gateway.
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Open the aisle door.
Table 8-11 Remote door opening
Path
Monitoring > Aisle >
Smart Module Actuator
Group > Smart Module
Actuator n > Controls
● Remotely opening the door may open the smart module door, and this may
● Remotely opening the skylight may open the smart module skylight, and this
----End

8.1.7.13 How Can I Set and Add a PDU8000 (Modbus RTU)?

Prerequisites
One end of the straight-through cable has been connected to the COM port on
the PDU8000, and the other end has been connected to the COM port on the
ECC800-Pro collector or ETH converter.
Procedure
Step 1 Set the PDU8000 monitoring parameters.
1.
Issue 02 (2020-09-07)
NO TE
The following describes how to remotely open a door.
CA UTION
pose security risks. Exercise caution when performing this operation.
may pose security risks. Exercise caution when performing this operation.
Enter the PDU8000 home screen, tap System Info.
Copyright © Huawei Technologies Co., Ltd.
Setting
Select Remote door opening and click Submit
8 FAQ
275