Configuring Pue Standard Mode - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Table 6-41 PUE calculation formula
Configuration
Mode
Standard
User-defined
NOTE

6.8.1 Configuring PUE Standard Mode

Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Choose System Settings > PUE Configuration.
Step 3 Set PUE function to Enable.
Step 4 Set PUE configuration mode to Standard, and click Submit.
Step 5 View the PUE. Choose Query > Performance Data and set Device to ECC800
from the drop-down list box. For other searching criteria such as Performance
data, Statistics mode, Start time, and End time, select the item based on
requirements and click Query. You can also view the PUE in the dashboard or
curve on the home page.
----End
Example of PUE Calculation
In this example, the PUE is calculated on the basis of the start time 17:00 and end
time 18:00.
1.
2.
Issue 02 (2020-09-07)
PUE Calculation Method
PUE = Increment in total system input electrical energy/
Increment in total electrical energy of system IT load output
PUE = Increment in total active electrical energy of device
input/Increment in total energy consumption of IT load output
When the configuration mode is set to Standard, the ECC800-Pro can automatically
calculate the PUE of multiple devices connected in the N+1 and 2N scenarios.
Choose Query > Performance Data.
Set Device to ECC800, Performance data to Total system input electrical
energy, and Statistics Mode to Hour, set other query criteria such as Start
time and End Time as required, and click Query. Record the increment in
total system input electrical energy of the ECC800-Pro. Increment in total
system input electrical energy = 110.0 kWh – 100.0 kWh = 10.0 kWh.
Figure 6-62 Querying the total system input electrical energy
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
207