What Should I Do If A Message Indicating Unauthorized Fingerprint Is Displayed During Fingerprint Scanning On The Access Control Device (Fingerprint Has Been Recorded); How Can I Rectify Camera Access Restriction - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Figure 8-28 SW button
----End
8.1.24 What Should I Do If a Message Indicating Unauthorized
Fingerprint Is Displayed During Fingerprint Scanning on the
Access Control Device (Fingerprint Has Been Recorded)?
Procedure
Step 1 Ensure that no obstacles exist in front of the fingerprint, and then scan the
fingerprint on the access control device again.
Step 2 If the message is still displayed after you perform
fingerprint information.
1.
2.
3.
Step 3 If the message indicating unauthorized fingerprint is still displayed after you
perform
1.
2.
----End

8.1.25 How Can I Rectify Camera Access Restriction?

Prerequisites
If Huawei S12700 series switch is used, refer to this section to rectify the fault. For
more information, consult network engineers.
Context
The camera is inaccessible after the MAC address and IP address are bound in
network configuration.
Issue 02 (2020-09-07)
Choose System Settings > Access Management. On the Authorization
Operations tab page, click Synchronize to Device, select the device for
synchronizing fingerprint information, and click Start Synchronization.
After the Synchronization Status of the device becomes Synchronized, close
the Synchronize Access Permission page.
Scan the fingerprint on the access control device again.
Step 1 and Step
Choose System Settings > Access Management.
Select the involved user and record the fingerprint again.
Copyright © Huawei Technologies Co., Ltd.
2, you need to record the user's fingerprint again.
Step 1, synchronize the
8 FAQ
326