Huawei ECC800-Pro User Manual page 101

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Networking Switch
Table 3-86 Networking switch description
Name
Button
pressing
Button
holding down
Issue 02 (2020-09-07)
NO TE
● If an indicator blinks at long intervals, it is blinking on for 1s and then off for 1s.
● If an indicator blinks at super short intervals, it is blinking at 10 Hz, that is, on for 0.05s
and then off for 0.05s.
● If an indicator blinks at short intervals, it is blinking at 4 Hz, that is, on for 0.125s and
then off for 0.125s.
Definition
Press the button for
less than 5 seconds.
Hold down the
button for more
than 5s.
Copyright © Huawei Technologies Co., Ltd.
Function
Searches for and joins a network if
there is no network. Initializes the
network parameters if there is a
network.
Clears the current network and resets
the wireless module; disconnects the
network.
3 Device Description
90