Others - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
●
●
●
●
●
●

1.6 Others

●
●
●
●
Issue 02 (2020-09-07)
When moving the equipment by hand, wear protective gloves to prevent
injuries.
Move or lift the equipment by holding its handles or lower edges. Do not hold
the handles of modules (such as power supply units, fans, and boards) that
are installed in the equipment because they cannot support the weight of the
equipment.
Avoid scratching the cabinet surface or damaging cabinet components and
cables during equipment transportation.
When transporting the equipment using a forklift truck, ensure that the forks
are properly positioned to ensure that the equipment does not topple. Before
moving the equipment, secure it to the forklift truck using ropes. When
moving the equipment, assign dedicated personnel to take care of it.
Choose railways, sea, or a road with good condition for transportation to
ensure equipment safety. Avoid tilt or jolt during transportation.
Move a cabinet with caution. Any bumping or falling may damage the
equipment.
Exercise caution when shutting down the smart cooling product. Doing so
may cause equipment and room overheating, which will damage the
equipment.
Exercise caution when powering off the rPDU or PDU2000. Doing so may
affect the power supply to equipment, which will interrupt services.
Exercise caution when manually shutting down the UPS inverter for
transferring to bypass mode, or when adjusting the UPS output voltage level
or frequency. Doing so may affect the power supply to equipment.
Exercise caution when setting battery parameters. Incorrect settings will affect
the power supply and battery lifespan.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
10