Huawei ECC800-Pro User Manual page 140

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Device Name
Smart U space manager
Cabinet electronic lock
Step 3 Click Smart Module View in Bind Cabinets and Devices.
Step 4 In the displayed dialog box for binding IT cabinets and devices, click Auto Bind to
bind devices.
Automatic binding is supported in one-to-one and one-to-four scenarios.
●
●
Issue 02 (2020-09-07)
NO TE
If the intelligent device does not support self-identification, perform step 5 to manually add
the device.
One-to-one scenario
Each cabinet corresponds to a UIM.
In this scenario, two or more types of intelligent devices are monitored in
each cabinet. The intelligent devices include the smart U space manager,
intelligent rPDU, cabinet electronic lock, and T/H sensor.
One-to-four scenario
Four cabinets correspond to one UIM.
In this scenario, only one type of intelligent devices is monitored in each
cabinet. The port for connecting the intelligent device to the UIM must meet
the physical connection rules in
NO TE
– This scenario supports four types of intelligent devices: smart U space manager,
intelligent rPDU, cabinet electronic lock, and T/H sensor.
– Each port on the UIM does not support cascading.
– The UIM must be installed in the first cabinet, and the intelligent devices in the
following three cabinets need to be connected to the first cabinet.
– If the actual number of IT cabinets is not an integral multiple of 4, connect cables
according to the rules. Idle COM ports on the UIM can be reserved.
– One UIM can connect to only one type of intelligent devices.
Table 6-2 Cable connection mode in the UIM one-to-four scenario
COM Port COM1
Connected Cabinet 1
Cabinet
COM Port COM2
Copyright © Huawei Technologies Co., Ltd.
Device Model
PN1-32I10-20E4G-AV4
XDUD-D100-S42U
DS899
Table 6-2.
COM3
Cabinet 2
COM4
6 Feature Description
Version
2.2.2
V42
N/A
COM5 COM7
Cabinet 3 Cabinet 4
COM6 COM8
129